pin plate for LK stenter
pin plate stenter
The more common pin stenters have pins about 5 mm long, mounted in two rows, about 3–4 pins/cm, along the base plate. The pins are thicker near the base to prevent direct contact of the fabric with the hot base plate. Clip stenters leave no pin marks in the selvedges, but customers will accept pinholes in the selvedges associated with pin stenters.
advantage of using pin plate
Using pin plate is that Increase the tension of the fabric,Cloth runs faster,can reach 100m/min .
How pin plate work
Pin plate is contacted with the pin plate holder,and the pin plate contacted with the chain .The press wheel presses the fabric onto the pins, so that the fabric stays on the pins and follows the transmission chain forward.
